FREE SHIPPING ON ORDERS OVER $50

Serving all of Virginia and Surrounding states | Cummins • Powerstroke • Duramax | 24-Hour Mobile Repair

SHOP: 1-844-862-1119
24-HOUR ROAD SERVICE: 1-540-862-1146

STN 0312-S3SXE-3GSPK | STAINLESS DIESEL SXE SINGLE SWAP PIPING KIT 03-12 CUMMINS

MSRP: $699.00

Part#: 0312-S3SXE-3GSPK

Manufacturer: STAINLESS DIESEL

$699.00

TRUCK YEAR * 

TRANSMISSION * 

FLANGE * 

YOUR MANIFOLD * 

EXTREME DUTY -6 OIL FEED LINE * 

COMPRESSOR OUTLET * 

PRE-FILTER WRAP * 

TURBO BLANKET * 

FINISH * 

Share this product:

Description

STN 0312-S3SXE-3GSPK | STAINLESS DIESEL SXE SINGLE SWAP PIPING KIT 03-12 CUMMINS

THIS KIT ONLY FITS s300 SXE turbos With or Without the cover modified for use with V-Band!
This kit only fits 40* angle stock location 2nd generation center outlet turbo mounting flange exhaust manifolds.

Stainless Diesel’s 2nd Gen style turbo piping kit for 3rd and 4th gen Dodge Diesel trucks. Dodge Cummins 5.9 and 6.7 Liter, 24v CR Drastically lower your EGT’s with outstanding efficiency and driveability when you upgrade to a 2nd gen style manifold and a 3rd gen style S300 turbo. The stainless Diesel 2nd Gen style turbo piping kit for 3rd gen Dodge Diesel trucks are built with HIGH STRENGTH CND’d flanges & aluminized mild steel piping. Unlike some competitors who use rubber hose & plastic pipes – our kits are strong enough for high boost anytime for many years! This piping kit puts your single turbo in twin position.  We find that inverting the manifold (facing upward), helps your turbo spool faster & more efficiently.  This will also make it easier to upgrade to twin turbos later down the road.

Included in this kit:

  • High Flow Stainless Diesel cold air kit w/ S&B Airfilter
  • braided stainless steel High Temp Oil Supply Line
  • Oil supply line fittings
  • Oil drain line
  • Press-In Aluminum block drain & silicone drain hose
  • Oil drain gasket
  • Turbo Gaskets
  • Turbo Mounting Studs
  • Turbo Mounting Bolts
  • V-Band Clamp for Down Pipe
  • High Torque T-Bolt Clamps
  • 3.00″ Bead-rolled Intercooler Pipe
  • Silicone Boot for intercooler pipe to turbo side (2003-2010 5.9 trucks will use the factory IC boot at the intercooler)
  • 5.00″ Air Cleaner Pipe w/ air inlet temperature sensor provision and MAF on 6.7 trucks
  • 4.00″ to 5.00″ Silicone boot w/ clamps
  • 4.00″ Down Pipe (aluminized steel)
  • 1.00″  Divided Spacer
  • Waterline on 2003 – 2005 model 5.9s and 2007.5 – 2012 6.7s
  • Crank Case Ventilation kit (only on 2007.5 +)
  • Installation instruction packet w/ pictures
  • REQUIRES 2nd GEN 40* ANGLED MANIFOLD

Stainless Diesel

 

Fitment: 2003-2012 Dodge 5.9L/6.7L Cummins